| Parte n. | Fabbricante | Applicazione |
|---|
| AT27LV020A-90VI | Atmel | 2 Megabit(256K x 8) low voltage OTP EPROM |
| AT49LV040-20CC | Atmel | 2-Megabit (512K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT43312 | Atmel | Self-and bus-powered USB hub controller |
| AT59C22-10PC-2.5 | Atmel | 4-wire serial EEPROM 2K(256 x 8 or 128 x 16) |
| AT27C020-55JC | Atmel | 2-Megabit (256K x 8)OTP EPROM,25mA active current 0.1mA standby current |
| AT49F040-70JC | Atmel | 4-Megabit (512K x 8) 50-volt only CMOS flash memory, 50mA active, 0.1mA standby |
| TS68020MF1B/C16 | Atmel | HCMOS 32-bit virtual memory microprocessor, 16.67MHz |
| AT49F8192-12RC | Atmel | 8-Megabit (512K x 16) 5-volt ohly CMOS flash memory, 50mA active current, 0.3mA standby current |
| AT49LV040T-20VC | Atmel | 2-Megabit (512K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT89LS53-12JC | Atmel | 8-Bit microcontroller with 12K bytes flash, 12MHz, 2.7V to 6.0V |
| ATF1504AS-10QC100 | Atmel | High-performance EE CPLD, 125 MHz |
| AT24C08-10PC-1.8 | Atmel | 2-wire serial EEPROM 8K(1024 x 8) |
| AT49BV001NT-12PC | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.1mA standby, 2.7V to 3.6V |
| AT49F080T-15RC | Atmel | 8-Megabit (1M x 8) 5-volt ohly flash memory, 50mA active current, 0.1mA standbgy current |
| ATF22LV10C-15SC | Atmel | High performance EE PLD, 3V to 5.5V |
| ATF22V10BQL-20XI | Atmel | High-performance EE PLD |
| AT49BV8192T-15RC | Atmel | 8-Megabit (512K x 16) CMOS flash memory, 25mA active, 0.05mA standby |
| AT49F010-12PC | Atmel | 1-Megabit (128K x 8) 5-volt only CMOS flash memory, 120ns |
| AT49BV1614T-12CC | Atmel | 16-Megabit(1M x 16 or 2M x 8) 3-volt only flash memory, 25mA active, 0.01mA standby |
| AT28C040-20LISL703 | Atmel | 4-Megabit (512K x 8) paged EEPROM, 80mA activ current, 3mA standby current,operation read |
| AT93C57W-10SI-2.7 | Atmel | 3-wire serial EEPROM 2K(256 x 8 or 128 x 16) |
| AT45DB161-RI | Atmel | 16-Megabit 2.7-volt only serial DataFlash, 10mA active, 0.01mA standby, 13 MHz |
| AT25128W-10SC-2.7 | Atmel | SPI serial EEPROM 128K (16,384 x 8),2100kHz |
| AT24C08A-10TI | Atmel | 2-Wire serial EEPROM, 400kHz, 4.5V to 5.5V |
| AT27C512R-45JC | Atmel | 512K (64K x 8) OTP CMOS EPROM |
| AT24C32-10PI | Atmel | 2-wire serial EEPROM 32K(4096 x 8),400kHz |
| AT49F4096A-90RC | Atmel | 4-Megabit (256K x 16) CMOS flash memory, 50mA active, 0.3mA standby |
| T89C51RD2-SMUC-L | Atmel | 0 to 25 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT27C040-12PC | Atmel | 4-Megabit (512K x 8)OTP EPROM |
| AT49HF010-55PC | Atmel | 1-Megabit (128K x 8) 5-volt only CMOS flash memory, 55ns |
