| Parte n. | Fabbricante | Applicazione |
|---|
| AT29C512-70JC | Atmel | 512K (64K x 8) 5-volt only CMOS flash memory,50mA to 0.1mA |
| ATF1516AS-15QC160 | Atmel | High performance EE-based CPDL, 100 MHz |
| AT28HC256F-12PI | Atmel | 256(32K x 8) high speed CMOS EPROM |
| AT49F001-70JC | Atmel | 1-Megabit (128K x 8) 5-volt only flash memory, 50mA active, 0.1mA standby |
| AT49LV001T-70JI | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.3mA standby, 3.0V to 3.6V |
| AT49F4096-12RC | Atmel | 4-Megabit (256K x 16) 5-volt only CMOS flash memory,50mA active current,0.3mA standby current |
| AT87F51-20PC | Atmel | 8-bit microcontroller with 4K bytes QuickFlash, 5V power supply |
| AT49BV002N-12VI | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.3mA standby |
| AT49LV001-12VC | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.1mA standby, 3.0V to 3.6V |
| AT45DB080-RI | Atmel | 8-Megabit 2.7-volt only sequential access para]lel I/O DataFlash, 10mA active, 0.01mA standby |
| AT29BV040A-35TC | Atmel | 4 Megabit (512K x 8) single 2.7-volt battery-voltage CMOS flash memory |
| AT45D021-RC | Atmel | 2-Megabit 2.7-volt only serial DataFlash, 5MHz, 10mA active, 0.015mA standby |
| AT27C512R-55RI | Atmel | 512K (64K x 8) OTP CMOS EPROM |
| AT90S4433-8AI | Atmel | Microcontroller, in-system programmable flash=4K, EEPROM=256B, SRAM=128B, voltage range=4.0V - 6.0V, 8 MHz |
| AT6003-4JI | Atmel | Coprocessor field programmable gate arrays, 5V |
| AT49BV4096-20TC | Atmel | 4-Megabit (256K x 16) 3-volt only CMOS flash memory, 25mA active, 0.05mA standby |
| AT6010H-4QC | Atmel | Coprocessor field programmable gate arrays, 5V |
| AT28HC256-90JI | Atmel | 256(32K x 8) high speed CMOS EPROM |
| ATV2500BQ-25KM/883 | Atmel | High-speed high-density UV erasable programmable logic device |
| TS68882MRB/C16 | Atmel | CMOS enhanced floating-point co-processor, 16.67MHz |
| ATF16V8BQL-25SI | Atmel | High-performance flash PLD |
| AT24C128-10PC | Atmel | 2-wire serial EEPROM 128K(16,384 x 8),1000kHz |
| AT90LS2323-4PI | Atmel | 8-bit microcontroller with 2K bytes of in-system programmable flash, 2.7-6.0V |
| AT17LV256A-10JI | Atmel | FPGA configuration EEPROM, 256K, 3.3V |
| AT49LV020-90TI | Atmel | 2-Megabit (256K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT93C46-10TI-2.7 | Atmel | 3-wire serial EEPROM 1K(128 x 8 or 64 x16) |
| AT27C010-15TC | Atmel | 1Megabit(128K x 8) OTP CMOS EPROM,35mA max |
| AT27C400-90TC | Atmel | 4-Megabit (256K x 16 or 512K x 8 ) OTP EPROM, 40mA active, 0.1mA standby |
| ATMEGA161-4AI | Atmel | Microcontroller with 16K bytes in-system programmable flash, power supply 2.7 - 5.5V, 4 MHz |
| AT24C04A-10TI | Atmel | 2-Wire serial EEPROM, 400kHz, 4.5V to 5.5V |
