| Parte n. | Fabbricante | Applicazione |
|---|
| PST3455 | Mitsumi | CMOS system reset |
| PST9120 | Mitsumi | System reset |
| MM1507 | Mitsumi | Video switch Y/C mix |
| MM1373B | Mitsumi | Detection of lithium ion battery overcharging |
| PST593KM | Mitsumi | System reset |
| MM1288CQ | Mitsumi | TFT liquid crystal interface |
| MM1385AN | Mitsumi | Microminiature low-power consumption low-saturation regulator |
| PST3354 | Mitsumi | CMOS system reset |
| PST600F | Mitsumi | System reset |
| PST3140 | Mitsumi | CMOS system reset |
| PST3449 | Mitsumi | CMOS system reset |
| PST9236 | Mitsumi | System reset |
| MM1034XD | Mitsumi | HBS-compaqtible driver and receiver with power supply |
| PST7039M | Mitsumi | System reset |
| MM1181ZM | Mitsumi | Low-noise, low-saturation three-pin regulator |
| MM1114XS | Mitsumi | 3-input 1-output video switch |
| MM3101J | Mitsumi | Low-ripple, low-saturation CMOS regulators, 1.8V |
| MM1309CF | Mitsumi | Protection of lithium ion battery (three cells in series) |
| MM1180GT | Mitsumi | Low-noise, low-saturation three-pin regulator |
| MM1174 | Mitsumi | System reset (with battery back-up) |
| PST9337U | Mitsumi | System reset |
| MM1454 | Mitsumi | Q surround processor |
| MM1593E | Mitsumi | Low-saturation 300mA regulators 3.4V |
| MM1021XS | Mitsumi | Sync detector |
| MM3093K | Mitsumi | Low-ripple, low-saturation CMOS regulators, 3.9V |
| MM1234 | Mitsumi | 2-input 1-output 3-circuit video switch |
| MM1385CN | Mitsumi | Microminiature low-power consumption low-saturation regulator |
| PST9128N | Mitsumi | System reset |
| MM1096BF | Mitsumi | System reset (with built-in watchdog timer) |
| MM1313AD | Mitsumi | IC BUS control 5-input 2-output AV switch |
