| Parte n. | Fabbricante | Applicazione |
|---|
| AT25160N-10SI-2.7 | Atmel | SPI serial EEPROM, 16K (2048 x 8), 2100kHz, 2.7V to 5.5V |
| T89C51RD2-SLSI-L | Atmel | 0 to 25 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| ATF1500A-12JI | Atmel | High performance EE PLD, 62.5 MHz |
| AT27C040-12PI | Atmel | 4-Megabit (512K x 8)OTP EPROM |
| AT80F51-16AC | Atmel | 8-Bit microcontroller with 4K bytes QuickFlash memory, 16MHz, 5V |
| AT27BV020-90VI | Atmel | 2-Megabit (256K x 8) unregulated Battery-Voltage high speed OTP EPROM, 8mA active, 0.02mA standby, 3.6V |
| AT25080N-10SC-2.7 | Atmel | SPI serial EEPROM, 8K (1024 x 8), 2100kHz, 2.7V to 5.5V |
| AT25128N-10SI | Atmel | SPI serial EEPROM 128K (16,384 x 8),3000kHz |
| AT49F1025-90VC | Atmel | 1-Megabit (64K x 16) 5-volt only flash memory, 50mA active, 0.1mA standby |
| AT49F002N-50TC | Atmel | 2-Megabit (256K x 8) 5-volt only flash memory, 50mA active, 0.1mA standby |
| AT27C2048-90PC | Atmel | 2 Megabit(128K x 16) OTP EPROM, 35mA active, 0.1mA standby |
| AT90LS8535-4PI | Atmel | 8-Bit microcontroller with 8K bytes in-system programmable flash, 2.7-6.0V pover supply, 4MHz speed |
| AT49BV001-12JC | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.1mA standby, 2.7V to 3.6V |
| AT89C55WD-24JC | Atmel | 8-bit microcontroller with 20K bytes flash, 256 x 8-bit internal RAM, 4.0V to 5.5V, 24 MHz |
| AT49BV001N-12JI | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.3mA standby, 2.7V to 3.6V |
| AT27C256R-15JC | Atmel | 256K (128K x 8) OTP CMOS EPROM |
| AT49F008-15TI | Atmel | 8-Megabit (1M x 8) 5-volt only flash memory, 50mA active, 0.3mA standby |
| AT27C040-12TC | Atmel | 4-Megabit (512K x 8)OTP EPROM |
| AT93C46A-10TI | Atmel | 3-wire serial EEPROM 1K(64 x 16) |
| AT49LV001NT-90TC | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.1mA standby, 3.0V to 3.6V |
| AT49F8192-90RC | Atmel | 8-Megabit (512K x 16) 5-volt ohly CMOS flash memory, 50mA active current, 0.3mA standby current |
| AT29LV020-20JC | Atmel | 2 megabit (256K x 8) 3-volt only CMOS flash memory,15mA active current,0.02mA standby current |
| AT27C520-70TC | Atmel | 512K(64K x 8) multiplexed addresses/outputs OTP EPROM, 20mA active |
| AT27BV1024-12JI | Atmel | 1 Megabit(64K x 8) unregulated battery-vltage high speed OTP CMOS EPROM, 8mA active, 0.02mA standby |
| AT89S4D12-12JC | Atmel | 8-bit microcontroller with 132K bytes flash data memory, 3.3V power supply |
| ATV2500L-35LI | Atmel | High-density UV-erasable programmable logic device |
| ATF1500AL-25JC | Atmel | High performance EE PLD, 43 MHz |
| AT49F001T-12PC | Atmel | 1-Megabit (128K x 8) 5-volt only flash memory, 50mA active, 0.1mA standby |
| AT24CS256W-10SI-2.7 | Atmel | 2-wire serial EEPROM with permanent software write protect 256K(32,768 x 8), 400kHz,twr(max) 10ms |
| AT49HLV010-90JC | Atmel | 1-Megabit (128K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
