| Parte n. | Fabbricante | Applicazione |
|---|
| AT28HC256E-90TI | Atmel | 256(32K x 8) high speed CMOS EPROM |
| AT89LV55-12JC | Atmel | 8-bit microcintroller with 20K byte flash, 2.7V-6.0V power supply |
| AT27C2048-15PI | Atmel | 2 Megabit(128K x 16) OTP EPROM, 35mA active, 0.1mA standby |
| AT49LV002N-70PI | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.3mA standby |
| AT28C17E-15PC | Atmel | 16K(2K x 8) CMOS EEPROM, 30mA active current, 0.1mA standby current |
| ATF1502ASL-20JI44 | Atmel | High performance EEPROM CPDL, 83.3 MHz |
| AT49BV002-90PI | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.3mA standby |
| AT27C4096-90PC | Atmel | 4-Megabit (256K x 16) OTP EPROM |
| ATF1516ASL-20QC160 | Atmel | High performance EE-based CPDL, 83.3 MHz |
| AT27C512R-15RC | Atmel | 512K (64K x 8) OTP CMOS EPROM |
| AT27C800-10TI | Atmel | 8-Megabit (512K x 16 or 1024K x 8) UV erasable EPROM, 50mA active, 0.1mA standby |
| AT22LV10-20PI | Atmel | Low-voltage UV erasable programmable logic device |
| AT25128C1-10CI | Atmel | SPI serial EEPROM 128K (16,384 x 8),3000kHz |
| AT27BV400-15RC | Atmel | 4-Megabit (256K x 16 or 512K x 8) unregulated Battery-Volotage high speed OTP EPROM 10mA active, 0.02mA standby |
| AT49F080-15CC | Atmel | 8-Megabit (1M x 8) 5-volt ohly flash memory, 50mA active current, 0.1mA standbgy current |
| AT45DB041-TC | Atmel | 4 Megabit 2.7-volt only serial data flash, 10mA active, 0.02mA standby, 5MHz |
| AT49F002-90JI | Atmel | 2-Megabit (256K x 8) 5-volt only flash memory, 50mA active, 0.3mA standby |
| AT89C55WD-24AC | Atmel | 8-bit microcontroller with 20K bytes flash, 256 x 8-bit internal RAM, 4.0V to 5.5V, 24 MHz |
| AT49HBV010-90TC | Atmel | 1-Megabit (128K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT49LV002N-12TC | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.1mA standby |
| AT45DB321B-CI | Atmel | 32-megabit 2.7-volt only dataflash, 20MHz |
| AT28HC256E-12UM/883 | Atmel | 256(32K x 8) high speed CMOS EPROM |
| AT90LS2333-4PC | Atmel | Microcontroller, in-system programmable flash=2K, EEPROM=128B, SRAM=128B, voltage range=2.7V - 6.0V, 4 MHz |
| AT93C66W-10SI-2.7 | Atmel | 3-wire serial EEPROM, 1000KHz, 2.7V to 5.5V |
| AT49F002N-70JC | Atmel | 2-Megabit (256K x 8) 5-volt only flash memory, 50mA active, 0.1mA standby |
| T89C51RD2-3CSI-M | Atmel | 0 to 40MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT93C46R-10SC | Atmel | 1K (128 x 8 or 64 x 16) 3-wire serial EEPROM, 2000KHz, 4.5V to 5.5V |
| AT93C46A-10TI-2.5 | Atmel | 3-wire serial EEPROM 1K(64 x 16) |
| 5962-89841 14LA | Atmel | High-performance EE PLD |
| AT49F1025-55JI | Atmel | 1-Megabit (64K x 16) 5-volt only flash memory, 50mA active, 0.3mA standby |
