| Parte n. | Fabbricante | Applicazione |
|---|
| DG301ACWE | MaximIC | Quad, TTL compatible CMOS analog switch. |
| MAX631BCPA | MaximIC | CMOS fixed +5V output voltage,adjustable output with 2 resistors step-up switching regulator. 10% output accuracy. |
| MAX6318MHUK28CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX6318MHUK33AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX243CPE | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| ICM7218BIJI | MaximIC | 8 digit LED display driver |
| MAX352MJE | MaximIC | Precision, quad, SPST analog switch |
| MX7545AKN | MaximIC | TTL/CMOS compatible for Vdd = 5V or CMOS compatible for Vdd = 15V, 12-bit buffered multiplying DAC. Gain error +-3 LSB. |
| MAX6320PUK33AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX4456EQH | MaximIC | Low-cost 8x8 video crosspoint switch. 65MHz -3dB bandwidth. |
| MAX6318MHUK50DX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MXD1013SA100 | MaximIC | 3-in-1 silicon delay line. Output delay 100ns. |
| MAX6317HUK27BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6319LHUK28C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 140ms |
| MAX5102AEUE | MaximIC | +2.7V to 5.5V, low-power, dual, parallel 8-bit DAC with Rail-to-Rail voltage output. INL (LSB) +-1 |
| MAX6307UK41D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.998(min),4.203(max).Nominal timeout period 140ms. |
| MAX6318MHUK28DY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX689CSA | MaximIC | High-accuracy, low-dropout linear regulator |
| MAX874EPA | MaximIC | 10microA, low-dropout, precision voltage reference. Output voltage 4.096V +-0.2%. Wide operating voltage range 4.3V to 20V. Line regulation over temp. 75microV/V. Load regulation over temp. 1.0mV/mA max |
| MAX531BESD | MaximIC | +5V, low-power, voltage-output, serial 12-bit DAC. Error (LSB) +-1. Internal 2.048V reference. Flexible output ranges 0V to Vdd, Vss to Vdd, 0V to 2.6V. |
| MX584JN | MaximIC | Pin programmable precision voltage reference. Error +-30mV. |
| MAX6378UR33-T | MaximIC | Ultra-low-power voltage detector, 3.3V |
| MAX4559ESE | MaximIC | +-15kV ESD-protected, low-voltage, CMOS analog multiplexer. |
| MAX6316MUK37DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX982CSA | MaximIC | Ultra-low-power, open-drain, dual comparator. Internal precision reference 2%. Internal hysteresis yes. |
| MAX4201ESA | MaximIC | Ultra-high-speed 780MHz -3dB bandwidth, 280MHz 0.1dB gain flatness, low-noise, low-power, open-loop buffer. |
| MAX6337US22D3-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 2.2V, reset timeout(min) 100ms. Standard version |
| MAX6307UK31D4-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.003(min),3.157(max).Nominal timeout period 1120ms. |
| MAX6310UK42D3-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.095(min),4.305(max). Nominal timeout period 140ms. |
| MAX660ESA | MaximIC | CMOS monolithic voltage converter |
