| Parte n. | Fabbricante | Applicazione |
|---|
| MAX6319MHUK48A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1ms |
| MAX810MEXR-T10 | MaximIC | Microprocessor reset circuit. Reset threshold 4.38V. Push-pull active-high reset. 10k increments. |
| MAX8215C/D | MaximIC | +-5V, +-12V dedicated microprocessor voltage monitor. |
| DG406C/D | MaximIC | Improved, 16-channel CMOS analog multiplexer |
| MAX6320PUK25CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX953EPA | MaximIC | Ultra low-power, single-supply Op Amp + comparator. Op Amp gain stability 1V/V. Supply current 5microA. |
| MAX381CPE | MaximIC | Precision, low-voltage analog switch. |
| MAX6317HUK38BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX4560ESE | MaximIC | +-15kV ESD-protected, low-voltage, CMOS analog switch (triple SPDT). |
| MAX747EPD | MaximIC | High-efficiency, PWM, step-down P-channel DC-DC controller |
| MAX6321HPUK31CW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX4667EPE | MaximIC | 2.5om, quad, SPST, CMOS analog switch (two NC switches). |
| MX7533LN | MaximIC | CMOS low-cost 10 bit multiplying D/A converter. Error 0.05% |
| MAX6316MUK33CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MX7502JQ | MaximIC | Low-power, monolithic, CMOS analog multiplexer. |
| MAX6575HZUT | MaximIC | Temperature sensor with multidrop single-wire digital interface. Timeout multiplier (microsec/K) 160,320,480,640. |
| MAX6316MUK35BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX7413EUA | MaximIC | 5th-order, lowpass, switched-capacitor filter. Filter response bessel, operating voltage +3V |
| MAX651CPA | MaximIC | 3.3V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX252ACHL | MaximIC | Complete, +5V-powered, isolated, dual RS-232 transceiver module. |
| ICM7250C | MaximIC | Programmable timer/counter |
| MAX1113CPE | MaximIC | 5 V, low-power, multi-channel, serial 8-bit ADC. 4-channel single-ended or 2-channel differential inputs |
| MAX709TEPA | MaximIC | Power-supply monitor with reset. Reset threshold voltage 3.08V |
| MXD1005SE100 | MaximIC | 5-tap silicon delay line |
| MX7521UD | MaximIC | CMOS 12 bit multiplying D/A converter. Error 0.05% |
| MAX349CAP | MaximIC | Serially controlled, low-voltage, 8-channel multiplexer |
| MAX3111EEWI | MaximIC | SPI/MICROWIRE-compatible UART and +-15kV ECD-protected RS-232 transceiver with internal capacitor. Single-supply operation +3.3V. Vcc (V) 3.3 |
| MAX6316MUK26AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6191CESA | MaximIC | Precision, micropower, low-dropout voltage reference. Output voltage 2.048V, initial accuracy +-10, temperature coefficient <25ppm. |
| MAX912EPE | MaximIC | Single, ultra-fast(10ns), low-power, precision TTL comparator. |
