| Parte n. | Fabbricante | Applicazione |
|---|
| MAX4540PWP | MaximIC | Low-voltage, dual 4-to-1 calibration multiolexer. |
| MAX191ACNG | MaximIC | Low-power, 12-bit sampling ADC with internal reference and power-down. Error(LSB) +-1/2. |
| MAX704RMJA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX6315US33D4-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.30V. Reset timeout period(min) 1120ms. |
| MAX162ACWG | MaximIC | Complete high-speed CMOS 12-bit ADC. Error(LSB) +-1/2. |
| MAX4551EEE | MaximIC | +-15kV ESD-protected, quad, low-voltage, SPST analog switches (four NC switches). |
| MAX6318MHUK39BW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6318LHUK30CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.000V min, reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX410BCSA | MaximIC | Single, 28MHz, low-noise, low-voltage, precision op amp. |
| MAX5152BCEE | MaximIC | Low-power, dual, 13-bit voltage-output DAC with configurable output amplifier. +5V single-supply operation. INL(LSB) +-1. |
| MAX698EWE | MaximIC | Low cost power-on reset controller. |
| MAX183BC/D | MaximIC | High-speed 12-bit A/D converter with external reference input. 3 microsec. max conversion time. Linearity(LSB) +-1. |
| MAX703C/D | MaximIC | Low-cost microprocessor supervisory circuit with battery backup. Precison supply-voltage monitor 4.65V. |
| MAX6332UR16D1-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.6V, reset timeout(min) 1ms. |
| MAX6321HPUK47BW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6313UK50D3-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 4.875(min) 5.125(max).Nominal timeout period 140ms. |
| MAX6321HPUK25DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX1245BC/D | MaximIC | +2.375V, low-power, 8-channel, serial 12-bit ADC . |
| MX7672BQ05 | MaximIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 5 microsec. Linearity +-1 LSB. |
| MAX7129CJL | MaximIC | 4-1/2 digit single-ship A/D converter with LCD driver |
| MAX1296AEEG | MaximIC | 420ksps, +5V, 2-channel single-ended/1channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +0.5, -0.5 |
| MAX771ESA | MaximIC | 12V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MXD1000PD500 | MaximIC | 5-tap silicon delay line |
| MXD1000UA150 | MaximIC | 5-tap silicon delay line |
| MX536AKD | MaximIC | 1V. Auxiliary dB output 60dB range. Low power 1.2mA(typ). |
| MAX3223CAP | MaximIC | 1microA supply current, true +3V to +5.5V RS-232 transceiver with AutoShutdown. |
| MAX4174AEEUK-T | MaximIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 1.25, 1+ (Rf/Dg) noninverting gain 2.25, -3dB BW 450kHz. |
| MAX6317HUK35CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MX7672LP05 | MaximIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 5 microsec. Linearity +-1/2 LSB. |
| DG406DWI | MaximIC | Improved, 16-channel CMOS analog multiplexer |
