| Parte n. | Fabbricante | Applicazione |
|---|
| MAX481MJA | MaximIC | Low-power, slew-rate-limited RS-485/RS-422 transceiver. Half-duplex. Data rate 2.5Mbps. Slew-rate limited - no. Low-power shutdown - yes. Receiver/driver enable - yes. Quiescent current - 300 microA. Number of transmitter on bus - 32. |
| MAX361MJE | MaximIC | Precision, quad, SPST analog switch. |
| MAX6317HUK50BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX6319MHUK26B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 20ms |
| DG200ACK | MaximIC | Dual monolithic SPST CMOS analog swith |
| MAX202EWE | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX7405EPA | MaximIC | 8-th-order, lowpass, bessel, switched-capacitor filter. Single-supply operation +3V |
| MAX6318LHUK36DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.600V min, reset timeout 1.12sec,typ watchdog timeout 102ms |
| MAX4074BLEUK-T | MaximIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 60V/V, noniverting gain 61V/V, -3dB BW 66kHZ. |
| MAX6318LHUK31AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.080V min, reset timeout 1ms, typ watchdog timeout 102ms |
| MAX176BC/D | MaximIC | Serial-output, 250 ksps 12-bit ADC with T/H and reference. Error(LSB) +-1. |
| MAX6310UK38D2-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.705(min),3.895(max). Nominal timeout period 20ms. |
| MAX6318LHUK37AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.700V min, reset timeout 1ms,typ watchdog timeout 102ms |
| MAX3233EEWP | MaximIC | +-15kV ESD-protected, 1microA, 250kbps, 3.3V, dual RS-232 with internal capacitor. |
| MAX876AEPA | MaximIC | Low-power, low-drift precision voltage reference. 10V+-3.0mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC. |
| MAX6313UK38D3-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.705(min) 3.895(max).Nominal timeout period 140ms. |
| MAX6379XR45-T | MaximIC | Ultra-low-power voltage detector, 4.5V |
| MAX4517C/D | MaximIC | +-1V to +-6V dual-supply opration, low-on-resistance, SPST, CMOS analog switch. Normally closed (NC). |
| MX7581AD | MaximIC | CMOS 8-bit 8-channel data acquisition system. Error 1 7/8 LSB. |
| MAX6316LUK28CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX6314US38D4-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.80V. Reset timeout period(min) 1120ms. |
| MAX1687ESA | MaximIC | Step-up DC-DC converter with precise, adaptive current limit for GSM. |
| MAX4275AOEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 9, 1+ (Rf/Dg) noninverting gain 10, -3dB BW 640kHz. |
| MAX802MCPA | MaximIC | Microprocessor supervisory circuit. 4.40V precision supply-voltage monitor. Power-fail accuracy guaranteed to +-2%. |
| MAX6316MUK42DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX4502CUK-T | MaximIC | Low-voltage, SPST, CMOS analog switch. |
| MAX507AMRG | MaximIC | Voltage-output, 12-bit DAC with internal reference. 12 data-bus widths. Error +-1/2. |
| MAX6352MTUT-T | MaximIC | Dual-voltage microprocessor supervisory circuit with manual reset. Reset threshold 4.38V (Vcc5) and 3.08V (Vcc3). Active-low open-drain reset. |
| ICL7641CCWE | MaximIC | Quad operational amplifier, 10mV |
| MXD1000C/D500 | MaximIC | 5-tap silicon delay line |
