| Parte n. | Fabbricante | Applicazione |
|---|
| ICL7665IPA | MaximIC | Microprocessor voltage monitor with dual overvoltage and undervoltage detection |
| MAX708C/D | MaximIC | Low-cost, microprocessor supervisory circuit. Active-high reset output. Precision supply-voltage monitor 4.4V. |
| MAX7413CPA | MaximIC | 5th-order, lowpass, switched-capacitor filter. Filter response bessel, operating voltage +3V |
| MAX4530C/D | MaximIC | Low-voltage, CMOS analog ICs configured as an 8-channel multiplexer. |
| MXD1013PA060 | MaximIC | 3-in-1 silicon delay line. Output delay 60ns. |
| MAX4544EUA | MaximIC | Low-voltage, single-supply single SPDT analog switch. |
| MXD1013PD090 | MaximIC | 3-in-1 silicon delay line. Output delay 90ns. |
| MAX6319LHUK46A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1ms |
| DG387ABK | MaximIC | General purpose CMOS quad analog switch. |
| ICL7136CJI | MaximIC | Low power, 3-1/2 digit A/D converter |
| MAX232ECWE | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MXD1013C/D200 | MaximIC | 3-in-1 silicon delay line. Output delay 200ns. |
| MAX3221CUE | MaximIC | 1microA supply current, true +3V to +5.5V RS-232 transceiver with AutoShutdown. |
| MAX6316LUK49BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reser input,reser output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX3081CPA | MaximIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| MAX4174BHEUK-T | MaximIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 40, 1+ (Rf/Dg) noninverting gain 41, -3dB BW 390kHz. |
| MAX1480BCPI | MaximIC | Complete, isolated RS-485/RS-422 data inteface. |
| MAX6316MUK40CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX6314US45D4-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.50V. Reset timeout period(min) 1120ms. |
| MAX6318MHUK39CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX637BEPA | MaximIC | Preset -15V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 10%. |
| MAX6318MHUK33CW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| DG381BK | MaximIC | General purpose CMOS dual analog switch. |
| MAX5188BEEI | MaximIC | Dual,8-bit, 40MHz, current/voltage, alternate-phase output DAC. |
| ICM7217AIPI | MaximIC | 4 digit (LED) presettable up/down ciounter |
| MX7837SQ | MaximIC | Complete, dual, 12-bit multiplying DAC. 8-bit + 4-bit interface. Error (LSB) +-1 |
| MAX2422EAI | MaximIC | 900 MHz image-reject transceiver. |
| MAX6316LUK31DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MX7545ALCWP | MaximIC | TTL/CMOS compatible for Vdd = 5V or CMOS compatible for Vdd = 15V, 12-bit buffered multiplying DAC. Gain error +-1 LSB. |
| MAX4519EEE | MaximIC | Precision, dual 2-channel, low-voltage, CMOS analog multiplexer. Single-supply operation (+2.2V to +15V) or bipolar-supply operation (+-2.2V to +-8V). |
