| Parte n. | Fabbricante | Applicazione |
|---|
| MAX519BCPE | MaximIC | 2-wire serial 8-bit dual DAC with Rail-to-Rail outputs. TUE(LSB) 1.5. |
| DG441C/D | MaximIC | Improved, quad, SPST analog switch |
| MAX294EWE | MaximIC | 8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 25kHz |
| MAX6320PUK36CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX6314US43D3-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.30V. Reset timeout period(min) 140ms. |
| MAX321MJA | MaximIC | Precision, dual-supply, SPTS analog switch. |
| MAX6319LHUK37B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 20ms |
| MX7581BQ | MaximIC | CMOS 8-bit 8-channel data acquisition system. Error 3/4 LSB. |
| MAX6225BCSA | MaximIC | Low-noise, precision, +2.5V output voltage reference. Max TEMPCO (ppm/C) 5.0. |
| MAX607ESA | MaximIC | Low-profile, 5V or 12V or adjustable, step-up converter for flach Memory/PCMCIA card. |
| MAX241EEWI | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX6317HUK39AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX6316MUK46AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX4281ESA | MaximIC | Single, open-loop, unity-gain stable amplifier |
| MAX537AMDE | MaximIC | Calibrated, quad, 12-bit voltage-output DAC with serial interface. +-5V supply operation. INL (LSB) +-1/2 |
| MAX5153ACEE | MaximIC | Low-power, dual, 13-bit voltage-output DAC with configurable output amplifier. +3V single-supply operation. INL(LSB) +-1. |
| MAX6310UK39D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.803(min),3.998(max). Nominal timeout period 1120ms. |
| MAX6321HPUK34CW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX191BCWG | MaximIC | Low-power, 12-bit sampling ADC with internal reference and power-down. Error(LSB) +-1. |
| MAX649CSA | MaximIC | 5V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX877C/D | MaximIC | Step-up/step-down DC-DC converters |
| MAX163CCNG | MaximIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX922CPA | MaximIC | Dual micropower, low-voltage comparator. |
| MAX452C/D | MaximIC | CMOS unity-gain stable, 50MHz video amplifier. |
| MAX3318EEAP | MaximIC | +-15kV ESD-protected, 2.5V, 1microA, 460kbps, RS-232 compatible transceiver. |
| MAX793SESE | MaximIC | Microprocessor supervisory circuit. Reset threshold 2.85V to 3.00V. Active-low reset.Active-high reset.Low-line early warning output.Backup-battery switchover.External switch driver.Power-fail comparator.Battery OK output.Watchdog input.Manual reset inp. |
| MAX489ECSD | MaximIC | +-15kV ESD-protected, low-power, RS-485/RS-422 transceiver. Full-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - no. Receiver/driver enable - yes. Quiescent current - 120 microA. Number of transmitter on bus - 32. |
| MAX825REUK | MaximIC | Microprocessor supervisory circuit. Reset threshold 2.63V. Active-low reset. Active-high reset. Manual reset input. |
| MAX6320PUK40CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX305ESE | MaximIC | Precision, dual, high-speed analog switch. |
