| Parte n. | Fabbricante | Applicazione |
|---|
| MAX6318MHUK26AX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| DG308ACY | MaximIC | Quad, SPST, NO analog switch |
| MAX796CSE | MaximIC | Step-down controller with synchronous rectifier for CPU power. 3.3V/5V or adjustable main output. Regulates positive secondary voltage (such as +12V) |
| MAX465CNG | MaximIC | Two-channel, triple RGB switch and buffer. Voltage gain 2V/V. |
| MAX6313UK42D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 4.095(min) 4.305(max).Nominal timeout period 1120ms. |
| DG408AK | MaximIC | Improved, 8-channel CMOS analog multiplexer |
| MAX6309UK39D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.803(min),3.998(max) Nominal timeout period 1ms. |
| MAX6320PUK47AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX820SESE | MaximIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.91V. Reset and low-line threshold accuracy +-2% |
| MAX167CMRG | MaximIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX4582EPE | MaximIC | Low-voltage, CMOS analog multiplexer (two 4-channel). |
| MAX6321HPUK39DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| DG201ACSE | MaximIC | Quad SPST CMOS analog switch. |
| MAX310EPE | MaximIC | CMOS RF/video multiplexer (1-of-8). |
| MAX809MEUR-T10 | MaximIC | Microprocessor reset circuit. Reset threshold 4.38V. Push-pull active-high reset. 10k increments. |
| MAX379CWG | MaximIC | High-voltage, fault-protected analog multiplexer. |
| MAX4617EUE | MaximIC | Low-woltage, high-speed, CMOS analog IC configured as 8-channel multiplexer |
| MXD1013C/D075 | MaximIC | 3-in-1 silicon delay line. Output delay 75ns. |
| MAX194ACWE | MaximIC | 14-bit, 85ksps ADC with 10 microA shutdown |
| MAX4274BBEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 12.5, 1+ (Rf/Dg) noninverting gain 13.5, -3dB BW 460kHz. |
| MAX3224EAP | MaximIC | 1microA supply current, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus |
| MAX140C/D | MaximIC | 3 1/2 digit A/D converter with bandgap reference and charge-pump voltage converter |
| MAX4700EAE | MaximIC | 1.25om, quad, SPST, CMOS analog switch (one NC and one NO switches). |
| MAX199BEWI | MaximIC | Multi-range (+-4V, +-2V, +4V, +2V), +5V supply, 12-bit DAS with 8+4 bus interface |
| MAX6320PUK30BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6320PUK32CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MXD1013PA090 | MaximIC | 3-in-1 silicon delay line. Output delay 90ns. |
| MAX6322HPUK42B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 20ms |
| MXD1013C/D090 | MaximIC | 3-in-1 silicon delay line. Output delay 90ns. |
| MAX400ETV | MaximIC | Ultra low offset voltage operational amplifier. |
