| Parte n. | Fabbricante | Applicazione |
|---|
| MAX6320PUK30DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX6320PUK25CX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MXD1013UA050 | MaximIC | 3-in-1 silicon delay line. Output delay 50ns. |
| DG302ACJ | MaximIC | Quad, TTL compatible CMOS analog switch. |
| MAX440EWI | MaximIC | High-speed video multiplexer/amplifier |
| MAX699EWE | MaximIC | Low cost power-on reset and watchdog controller. |
| MAX6334UR23D1-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.3V, reset timeout(min) 1ms. |
| MAX6344TUT-T | MaximIC | Microprocessor reset circuit with power-fail comparator. Reset threshold 3.08V. Push-pull active-high reset output, manual-reset input. |
| MAX6321HPUK46BY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6318MHUK33CY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX4275BNESA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 99, 1+ (Rf/Dg) noninverting gain 100, -3dB BW 230kHz. |
| MAX6501CMP095-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) +95. |
| MAX6321HPUK29DX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6320PUK34AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MX7534KN | MaximIC | Microprocessor-compatible, 14-bit DAC. INL +-1 LSB. |
| MAX876BCSA | MaximIC | Low-power, low-drift precision voltage reference. 10V+-5.0mV output (Ta=25gradC). TEMPCO(max) 20ppm/gradC. |
| DG309C/D | MaximIC | Quad, SPST, NC analog switch |
| MAX167BENG | MaximIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX122ACWG | MaximIC | 500ksps, 12-bit ADCs with track/hold and reference, INL (LSBs) +3/4 |
| MAX6316MUK41AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX4543CUA | MaximIC | Low-voltage, single-supply dual SPST analog switch. |
| MAX824TEUK | MaximIC | Microprocessor supervisory circuit. Reset threshold 3.08V. Active-low reset. Active-high reset. Watchdog input. |
| MAX6318MHUK47DY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX297CPA | MaximIC | 8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 50kHz |
| ICL7616DCPA | MaximIC | Single operational amplifier, 15mV |
| MX7537J/D | MaximIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-6 LSB. |
| MAX869LC/D | MaximIC | 2A, current-limited, high-side P-channel switch with thermal shutdown |
| MAX355CPE | MaximIC | Fault-protected analog multiplexer |
| MAX804RMJA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX6318LHUK41CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.100V min, reset timeout 140ms,typ watchdog timeout 6.3ms |
