| Parte n. | Fabbricante | Applicazione |
|---|
| MAX6316LUK49DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reser input,reser output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX6318LHUK30AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.000V min, reset timeout 1ms, typ watchdog timeout 102ms |
| MX580KH | MaximIC | High precision +2.5V reference. Tolerance +-25mV |
| MAX6316LUK34CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX687ESA | MaximIC | High-accuracy, low-dropout linear regulator |
| MAX7231AFIQ | MaximIC | Triplexed LCD decoder/driver (8 digits/7 segments; parallel input format; 2 annunciators per digit) |
| IH5352MJE | MaximIC | Quad RF and video switch |
| MAX6318MHUK42DX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6315US34D2-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.40V. Reset timeout period(min) 20ms. |
| MAX771CSA | MaximIC | 12V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MAX154ACWG | MaximIC | CMOS high-speed 8-bit ADC with multiplexer and reference. Error (LSB) +,-1/2 |
| MAX3080CSD | MaximIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| MAX6319LHUK37A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1ms |
| MAX6319MHUK37D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1120ms |
| MAX6321HPUK25DW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX296CPA | MaximIC | 8th-order, lowpass, switched-capacitor filter. |
| MAX6306UK49D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.778(min),5.023(max) Nominal timeout period 1ms. |
| MAX814TESA | MaximIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 3.00V (max) 3.06V, push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, low-line detector. |
| MAX4173TESA | MaximIC | Low-cost,voltage-output, high-side current-sense amplifier. Gain 20V/V. |
| ICL7652BC/D | MaximIC | Chopper-stabilized operational amplifier |
| MX7520SD | MaximIC | CMOS 10 bit multiplying D/A converter. Error 0.2% |
| MAX6316LUK49DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reser input,reser output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MX536AJH | MaximIC | 1V. Auxiliary dB output 60dB range. Low power 1.2mA(typ). |
| MAX533BCEE | MaximIC | 2.7V, low-power, 8-bit quad DAC with Rail-to-Rail output buffer. INL (LSB) +-2 |
| MAX3490C/D | MaximIC | 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 10Mbps. Supply voltage 3.0V to 3.6V |
| MAX743C/D | MaximIC | Dual-output, switch-mode regulator (+5V to +/-15V or +/-12V) |
| MAX800MCPE | MaximIC | Microprocessor supervisory circuit. Reset threshold(typ) 4.4V. Guaranteed power-fail accuracy to +-2% |
| MAX505BC/D | MaximIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Double-buffered logic inputs. TUE +-3/2 LSB. |
| MAX3130EAI | MaximIC | 3V to 5.5V, IrDA infrared transceiver with integrated RS-232 interface. |
| MAX6320PUK37DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
