| Parte n. | Fabbricante | Applicazione |
|---|
| MAX813LEPA | MaximIC | Low-cost, microprocessor supervisory circuit. Active-low manual-reset input. Active-high reset output. Precision supply-voltage monitor 4.65V. |
| MAX806SEPA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.925V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX6316LUK26AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX4573EAI | MaximIC | Serially controlled, clickless audio/video switch. 3-wire, SPI/QSPI/MICROWIRE - compatible. |
| MAX4256EUA | MaximIC | Single, single-supply operation +2.4V to 5.5V, low-noise, low-distortion, Rail-to-Rail op amp. Gain bandwidth 22MHz, min stable gain 10V/V, with shutdown. |
| MAX982CUA | MaximIC | Ultra-low-power, open-drain, dual comparator. Internal precision reference 2%. Internal hysteresis yes. |
| MAX3110EENI | MaximIC | SPI/MICROWIRE-compatible UART and +-15kV ECD-protected RS-232 transceiver with internal capacitor. Single-supply operation +5V. Vcc (V) 5 |
| MX7530J/D | MaximIC | CMOS 10 bit multiplying D/A converter. Error 0.2% |
| MAX6320PUK40AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX6320PUK34DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX6316MUK29CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 140ms,typ watchdog timeout 25.6sec |
| MAX4266EUA | MaximIC | Single, ultra-low-distortion, single-supply, 350MHz op apm with enable. Min gain 2V/V, single-supply operation +4.5V to +8.0V |
| DG384CWE | MaximIC | General purpose CMOS dual analog switch. |
| MAX891LC/D | MaximIC | Current-limited 500mA, high-side P-channel switch with thermal shutdown. On-resistance 0.12omega |
| MAX4374TEUB | MaximIC | Low-cost, micropower, high-side current-sense amplifier + comparator + reference IC. Gain +20V/V. |
| MAX6320PUK37AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| IH5143CPE | MaximIC | Low power fast CMOS analog switch. Dual, single pole, doube throw (Dual SPDT). |
| MAX875ACPA | MaximIC | Low-power, low-drift precision voltage reference. 5V+-2.0mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC. |
| MAX4181EUT | MaximIC | =1. |
| MX7828UQ | MaximIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1/2 |
| MAX6320PUK50CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX328CJE | MaximIC | Ultra-low lealage monolithic CMOS analog multiplexer. |
| MX7536KN | MaximIC | Microprocessor-compatible, 14-bit D/A converter. Accuracy +-1 LSB. |
| MAX6318MHUK27DW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX333ACUP | MaximIC | Precision, quad, SPDT, CMOS analog switch. |
| MAX6321HPUK50AX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX6314US44D2-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.39V. Reset timeout period(min) 20ms. |
| MAX126AEAX | MaximIC | 2x4-channel, simultaneous-sampling 14-bit DAS. INL (LSB) +2,-2 |
| MAX333AEWP | MaximIC | Precision, quad, SPDT, CMOS analog switch. |
| MAX6314US29D3-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 2.93V. Reset timeout period(min) 140ms. |
